+86-551-68661901
Bosh sahifa / Yangiliklar / Kontent

May 31, 2021

Termistor qanday aniqlanadi

When testing, use the ohm gear of the multimeter (depending on the nominal resistance value to determine the gear, generally R1 gear), which can be operated in two steps: first, test at normal temperature (indoor temperature is close to 25 degree ), use alligator clips instead of test pens to clip them separately. Measure the actual resistance value of the two pins of the PTC thermistor, and compare it with the nominal resistance value. If the difference between the two is within ±2Ω, it is normal. If the actual resistance value is too different from the nominal resistance value, it means that its performance is poor or damaged. Secondly, heating test, on the basis of normal temperature test, the second step test - heating test can be carried out, a heat source (such as an electric soldering iron) is heated close to the thermistor, and the multi-function indicator is observed. It is seen that the multi-function indicator changes with the increase of temperature, which indicates that the resistance value is gradually changing (the NTC resistance value of the negative temperature coefficient thermistor will become smaller, and the PTC resistance value of the positive temperature coefficient thermistor will become larger) , When the resistance value changes to a certain value, the displayed data will gradually stabilize, indicating that the thermistor is normal. If the resistance value does not change, it indicates that its performance has deteriorated and cannot be used continuously.

Sinov paytida quyidagi fikrlarga e'tibor qaratish lozim: (1) Rt ishlab chiqaruvchi tomonidan atrof-muhit harorati 25 daraja bo'lganda o'lchanadi, shuning uchun Rt ni multimetr bilan o'lchashda atrof-muhit harorati 25 darajaga yaqin bo'lganda ham bajarilishi kerak. sinovga yaroqliligini ta'minlash. ishonchlilik. (2) Oqimning termal ta'siridan kelib chiqqan o'lchov xatolarining oldini olish uchun o'lchov quvvati belgilangan qiymatdan oshmasligi kerak. (3) To'g'ri ishlashga e'tibor bering. Sinov paytida, inson tanasining harorati sinovga ta'sir qilmasligi uchun termistor korpusini qo'llaringiz bilan siqmang. (4) Issiqlik manbasini va PTC termistorini juda yaqin qilmaslik yoki kuyib ketishining oldini olish uchun termistor bilan bevosita aloqa qilishdan ehtiyot bo'ling.


Xabarni yuborish